Main » Catalog » Marking » Hand-Held Marking Systems » MARKATOR » MV5 M0/ZE301XL

MV5 M0/ZE301XL

MV5 M0/ZE301XL
Producer: MARKATOR
CNC Hand-Operated Marking System

Marking area (x/y), mm: 100х100

  • Marking area (X/Y): 100х100 mm;
  • Drive: Pneumatic
  • Character height: 0,7-99,9 mm;
  • Weight: 3,8 kg

Hand-held and combi dot peen markers

The flexible Combi marking systems MV5 MT0 (100 x 100 mm) are developed as a combination of a table and a hand held marking system. The marking head is equipped with a handheld and a robust start button. It works in all positions. A hoop guard against unintended operation is attached for safety reasons. Fixing the marking head to the column frame, you can adjust the height by the hand wheel on the column. The relative adjusted height is shown by a digital display.
The hand held marker can be mounted on individual supporting feet or prisms as fast and simple as to the column frame. The handheld must not be taken off. An optional prism stop provides superior gripping when marking round pieces. The marking head with high class guidance in connection with a combination of self-lubricating bearings is maintenance free. It offers optimal wear properties.

Price: 9 700 Евро с учетом НДС

as PDF

- Marking area: 100x100 mm;
- Execution: combined, 2 full in one machine (desktop + mobile)
- Marking speed: 10 characters height of 5 mm for 5 seconds;
- Character height: 0.7 - 99.9 mm (0.1 mm pitch);
- Marking depth: 0.02 - 0.4 mm (depending on material and equipment);
- Maximum height of the parts being marked (without feet) 295 mm
- Markings on the plane of the circle: 0 - 360 °;
- Font: GOST26.008-85 (optional), DIN, NK;
- Marking on the periphery of rotating bodies: using the fourth axis (optional);
- Characters: any;
- Management: The TNC ZE301XL
- Marking: paper, aluminum and steel to 62HRC;
- Force markings: adjustable;
- Possible differential curvature of up to 3 mm;
- Operating ambient temperature 0 to 50 ° C;
- Noise level: 78 dB (at 1 meter);
- Air Supply: 4.5-8 bar.
- Maximum height of the parts being marked (without turning the marking head): 300 mm
- Readability-engine machine: 0.05 mm
- Interfaces: USB interface for PC synchronization line;
The software package "Comfort" (a package spec. Functions, optional):
- Double-labeling;
- Simulator markings;
- Logos (graphics);
- Interactive prompts (in Russian), etc.
Website built by an AA «Chameleon»